blog di Andreyan Yanchev

1.Creating Generic Model with the measurement 15x25x3500cm.

2. Then creating Generic Model Face Based

3. Then creating new Family Generic Model and drawing reference line, doing angular for it, adding a new shared instant parameter s_Angle, and placing a work plane to it.

1.First we create a new family project.

2.Then we create a shared instant parameters, for lenght, width, thickness and name.

1.First creating a reference plane and then family types for the length and width.  

2.After that we create an extruded form and align the sides of the form to the reference plane.

1. Begin by starting a new project file for a family with a generic, metric template.
2. Access the family type settings and introduce a new parameter, linking it with shared parameters by selecting the pre-prepared shared parameter file.
3. Adjust the properties of the family type by focusing on the parameters H, L, and l, switching their type to instance-specific.
4. Sketch out two guiding reference planes, one positioned horizontally and the other vertically. Ensure proper alignment for subsequent steps.

1. Creating a “families” document - “Metric Generic Modul”
2. Drawing a “Reference plane”
3. Drawing “Aligned” for the “Reference plane”
4. Saving the family file in an Order for the following steps
5. Creating new Parameters at the “Family types”
6. Naming the “Aligned” lines after the Parameters
7. Crating a form with the command - “Extrusion”
8. Connecting the “Extruded form” with the Parameters from the “Family types”